6 Reasons for Choosing Thermoelectric Cooling

Share
Use thermoelectric cooling systems for better shipping and transit cases.
Dual air-conditioned case

For shipping and transit cases, traditional refrigeration technology is giving way to thermoelectric cooling. Here’s why:

1. Works in any Orientation – Even Zero Gravity!

Since there’s no refrigerant or compressor, a thermoelectric cooling unit can be mounted in any orientation. This gives the transit case designer more flexibility to utilize available space. And, if the case is tipped up or stood on end, it keeps working (but make sure air can flow over the hot side!).

2. Small and Light and Very Portable

Portability is a top concern in a transit case. Anything that adds weight, other than the payload, is a definite negative. Because of their solid-state electronic construction, thermoelectric coolers are the lowest-mass means of controlling temperature. And that leaves more space for the all-important contents.

3. No Moving Parts (other than fans) – Highly Reliable

Manufacturers quote MTBF’s of up to 150,000 hours for thermoelectric coolers. There’s just nothing to wear out or breakdown. That’s 17 years of uninterrupted operation! Compare that to compressor systems where seals become brittle; bearings wear; gas escapes.

4. Low Acoustic Noise and Vibration (especially when compared to a compressor)

When you’ve put delicate electronics in a transit case, the last thing you want is a pump hammering against the side. That can fatigue the contents – as well as anyone working nearby. Avoid disturbing compressor noise and the added weight you have to transport. Instead, choose a thermoelectric system. They are silent – except for the soft whirr of fans – and lightweight.

5. No Electrical Noise; No Signal Contamination

Many electrical systems – the kind you want to put in a transit case – are susceptible to electromagnetic interference (EMI) produced by a compressor system. But, by virtue of being low voltage and solid-state, a thermoelectric cooler has practically zero electrical emission.

6. Does Double Duty as a Heater – Ideal for Temperature Extremes

Some environments are hot in the day and cold at night. That can lead to condensation and all the associated problems. But, because the thermoelectric effect is reversible, it’s actually possible to turn the cooler into a heater, preventing the case contents from getting too cold.

See our selection of thermoelectric cases

Written By

Kelvin Aist has designed and sold cases and packaging solutions his entire career. He frequently blogs for Case Advisor.

Leave a Reply

Your email address will not be published. Required fields are marked *