The ConQuest 12U aluminum rackmount case, manufactured by Impact Cases, offers superior protection and shock isolation. With an EIA-310 compatible 19 inch rack frame, this case can handle vibration, impacts, and heavy equipment weighing 500 pounds. It’s designed to protect and shock isolate heavy payloads during transportation and rough handling.
Case Body Construction
The case is fabricated from high-tensile strength aluminum alloy with a thickness of 0.090’’. Riveted construction means seams and edges won’t peel or crack under stress or impact. Outside rib supports add extra strength and protect handles and latches from damage.
Rack Frame Construction
The rack is assembled from aluminum cross members and stainless steel mounting rails. The U channel framework, formed and welded together, adds strength to front and rear rack frames. Lockbolt fastening withstands vibration and shock and won’t loosen over time. The mounting rails are available in a square or round hole patterns.
The ConQuest offers superior shock-isolation. Up to 500 lbs. of equipment may be protected. This case can be modified for even higher payloads.
With a patented parting line design and corner lugs, the frame will not warp or sag. Fully loaded, the case lids always latch tight and square. Rugged HDPE skid pads support case stacking and protect the underside of the case body. The best and most durable zinc-plated handles, latches and corner caps are used in the ConQuest products.
Internal lid hangers allow a user to hand a lid in place during latching and unlatching. When the case is open, external lid hooks hold lids to the side.
Case Size and Options:
|Rack Depth (Inches)||24/30/36|
|Brand Family||Impact Cases | ConQuest Rack Cases|
|Did the job?|